Basic Info.
Information Content
Signal Transmission Equipment
AC Input Voltage
105-264VAC@47-63Hz
Installation Mode
Standard 19 Inches, 3u Rack
Product Description
3U Optical Transmission Platform
SOS03VI
SOS03VI optical transmission platform rack has 18 vertical application module slots, 2 horizontal power slots, and 1 dedicated network management control module slot.
Feature
Passive permanent structure to promote its strength;With flexible configurations, the rack is equipped with a built-in network management control module (including the air exhaust system, display, and standard RJ45 port, etc.);The high-density intelligent rack can contain the maximum of 18 application modules that can be inserted into any general slot;Due to the convenient hot-plug and blind-mating features, each application module can be added or removed without any tool. Its removal is convenient and fast;The plug-and-play application modules work independently and have independent status display and test port;Working temperature ranging from -20oC to +50oC;Redundant design for the power supply. Both the AC and DC power supplies are available. With a low power consumption, each application module is equipped with a forced air cooling system which leads to low heat and high reliability of the overall equipment and makes the equipment satisfy the low-carbon and environmental-friendly requirements;The large-screen full-color TFT touch-control liquid crystal display with a human centered design is easy for users to operate. The display can be used to show and control the operation status of the equipment;The cooling system composed of 8 fans provides a very good function of strong air exhaust and cooling;Based on the rack's SOS03VI-CM network management control module, the equipment status can be monitored either locally or remotely. The module supports the Web and SNMP network management.The online software upgrading can be done for each application module that serves such functions of restoration, backup, and arbitrary copy of configuration parameters
Specification
AC input voltage | 105-264VAC@47-63Hz |
Installed modules | 2 power supply modules, 1 network management control module, 18 application modules. |
Status Indication | Air fan status of control module is independently displayed (green: normal, red: alarm). |
Network management | RJ45 10BaseT Ethernet port, and it is on the rear panel of SOS03VI-CM. |
RF connector receptacle | F-type quick connector receptacle, and it is on the rear panel of SOS03VI. |
General indicators
Dimension | 483Mm (width) × 133 mm (height) × 500mm (depth) |
Weight of empty rack | 6Kg |
Power consumption | 360W |
Installation mode | Standard 19 inches, 3U rack. |
Status indication | Two-color status indication on the front panel of control module (green: normal, red: alarm) |
Status monitoring | Local or SNMP remote monitoring of SOS03VI-CM network management control module |
Operating temperature range | -20°C-+50°C (-4°F-+122°F) |
Storage temperature range | -40°C-+85°C (-40°F-+185°F) |
Relative humidity | 15 - 95% (non-condensing) |
Technical Indicators of SOS03VI-CM Network Management Control ModuleTechnical Indicators
IP port | Standard RJ45 |
Data rate | 10/100M self-adapting |
Display screen | 4.3'' (480×272) TFT LED touch screen |
Communication protocol | Standard SNMP protocol |
Data format | RFC and American standard MIB |
Alarm mode | Buzzer, flashing and changing of icon |
General indicators
Dimension | 121mm (height) x 22 (width) mm x 438.6mm (depth) |
Weight | 0.95Kg |
Power consumption | 2W |
Installation mode | Special plug-ins for SOS03VI rack |
Status indication | Two-color status indication on the front panel (green: normal, red: alarm) |
Status monitoring | Local or SNMP remote monitoring of SOS03VI-CM network management control module |
Operating temperature range | -20ºC-+50ºC (-4°F-+122°F) |
Storage temperature range | -40ºC-+85ºC (-40°F-+185°F) |
Relative humidity | 15 - 95% (non-condensing) |
Technical Indicators of SOS03VI - PSAC Power Supply ModuleTechnical Indicators
Operating voltage range | 150-265VAC@47-63Hz |
Output voltage stability | 0.5% |
Load stability | ≤2% |
Ripple and noise (resistive load) | Vpp ≤ output voltage x 0.5% |
Protection function | a. Overload protection 130% b. Over-voltage protection 130% c. Short-circuit protection the output voltage is near 0V, clear faults, and normal functioning is recovered. d. Over-heat protection overheat protection e. Delayed slow start after AC is connected, power supply starts after T (500ms≤T≤2s). |
Insulating strength | Input end and ground, input end and output end: AC1.5KV 5mA; output end and ground: AC0.5KV 5mA; insulation resistance > 50megohm. |
Mean time between failures | ≥ 10,000 hours |
Power factor | ≥0.9 (load ≥ 30%) |
Limit working parameter | Operating voltage: +12Vdc Minimum working current (A): 0.4A Maximum working current (A): 30A |
General indicators
Dimension | 164mm (length) × 42mm (width) × 202mm (depth) |
Weight | 1Kg |
Power consumption (maximum output power) | 360W |
Installation mode | Plug-ins for SOS03VI rack |
Status indication | Two-color status indication on the front panel of network management control module (green: normal, red: alarm) |
Status monitoring | Local or SNMP remote monitoring of SOS03VI-CM network management control module |
Operating temperature range | -20°C-+50°C (-4°F-+122°F) |
Storage temperature range | -40°C-+85°C (-40°F-+185°F) |
Relative humidity | 15 - 95% (non-condensing) |
Address:
C Building, No. 2, Baotian Road, Xinsheng Community, Longgang District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Apparel & Accessories, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
SEEHAI ELECTRON Co., Ltd was founded in 2001, is a productive enterprise of independent development, design, production and sales. We are specialized in communication equipment manufacturing especially for the equipment of CATV transmission system and the related accessories. SEEHAI possesses advanced production and testing equipment, including all kinds of metal processing equipment and professional testing instruments which are famous brands around the world, such as HP and Agilent Network Analyzer, Spectrum Analyzer, etc.
SEEHAI has a full set of mold for all series of metals, plastic, PCB and so on, which are used for SEEHAI brand products with distinct personality, rational structure and stable quality.
SEEHAI have certified by ISO9001: 2008 Quality Management System Authentication, all the products are with SEEHAI patent.
The registered trademark of SEEHAI is "SEEHAI".
SEEHAI adhere to the service tenet of "Quality first", wholeheartedly provide high quality service for customers.