Basic Info.
Function
Signal Transmission Equipment
Product Description
2-Way Outdoor Tap SYFZ-2XX-B
Features:
- RFI (woven metallic) gasket ensures against ingress/egress interference, ≥110dB RFI shielding.
- Stainless steel hardware and aluminum port caps for corrosion resistance.
- Aluminum alloy housing with weather resistant powder coating and spray painting.
- Weather seal gasket ensures water tight protection, waterproof test condition: 15 psi / 60s, at least IP56.
- Umbrella-effect housing design prevents accumulation of water at ports.
- Weatherproof, self-sealing F ports prevent breathing through ports when subscriber is disconnected; high quality silicon glue on all inside of F-ports.
- Bright Ni-plated, brass F ports offer increased strength and protection against corrosion in severe environmental conditions.
- Heat shrink ridges for easy installation.
- Bypass design: Include signal/power passing bar when faceplate is removed (uninterrupted power passing) .
- All IN and OUT ports are 5/8-24 female standard.
- All TAP ports are 3/8-32 female standard.
- Nominal impedance (all ports): 75 Ohms
- Using 2-layer high quality FR4 board P.C.B (Printed Circuit Board) for RF applications.
- Using high quality chip capacitors and chip resistors.
- Power Passing: 10A, 90VAC (IN-OUT Ports)
- Hum Modulation at 10A: - 70dB max.; at 12A: -65dB max.
- High Voltage Blocking Capacitors ;All ports Surge Withstand: All Tap ports at IEEE C62.41-1991 Category A3 (0.5 μs - 100 kHz Ring Wave, 6000 V, 200 A): 680V Capacitors; Input / Output ports at IEEE C62.41-1991 Category B3 (1.2/50 μs - 8/20 μs Combination Wave, 6000 V, 3000 A): 2KV capacitors.
-Weight: 300g.
Specification
| NO | ITEM | Specification |
| 1 | TAP LOSS max. (dB) | TAP VALUE (dB) | 4 | 8 | 11 | 14 | 17 | 20 | 23 | 25 | 29 | 32 |
5-470
471-1000 | ±1.0
±1.5 | ±1.0
±1.5 |
| 2 | INSERTION LOSS max.
(dB) | 5-47
48-470
471-600
601-750
751-1000 |
T
| ≤ 3.7
≤ 4.1
≤ 4.5
≤4.8
≤4.9 | ≤ 2.1
≤ 2.3
≤ 2.6
≤2.8
≤3.6 | ≤ 1.5
≤ 1.6
≤ 1.8
≤2.3
≤3.1 | ≤ 1.3
≤ 1.4
≤ 1.6
≤1.8
≤2.2 | ≤ 0.8
≤ 1.1
≤ 1.2
≤1.6
≤1.9 | ≤ 0.8
≤ 1.1
≤ 1.2
≤1.6
≤1.9 | ≤ 0.9
≤ 1.3
≤ 1.3
≤1.6
≤1.8 |
| 3 | ISOLATION OUT-TAP min.(dB) | 5-47
48-470
471-600
601-750
751-1000 | T
| ≥20
≥23
≥23
≥20
≥20 | ≥23*
≥22
≥22
≥20
≥20 | ≥23
≥23
≥23
≥20
≥20 | ≥25
≥25
≥25
≥23
≥22 | ≥28
≥30
≥27
≥25
≥25 | ≥35
≥33
≥32
≥28
≥27 | ≥34
≥34
≥30
≥28
≥27 | ≥38
≥38
≥36
≥32
≥30 | ≥40
≥40
≥34
≥32
≥30 |
| 4 | ISOLATION TAP -TAP min.(dB) | 5-47
48-470
471-600
600-750
751-1000 | ≥23
≥22
≥22
≥22
≥20 | ≥20
≥23
≥22
≥22
≥20 | ≥20*
≥20
≥20
≥20
≥20 | ≥23
≥23
≥22
≥22
≥20 | ≥22
≥22
≥20
≥20
≥20 | ≥22
≥23
≥23
≥20
≥20 | ≥22
≥23
≥23
≥20
≥20 | ≥22
≥23
≥22
≥20
≥20 |
| 5 | RETURN LOSS IN/OUT/TAP min.(dB) | 5-470
471-750
751-1000 | ≥16
≥17
≥17 | ≥16
≥17
≥17 | ≥16
≥18
≥18 | ≥17
≥18
≥18 | ≥18
≥18
≥18 |
Outdoor 8-Way Tap SYFZ-8**-B
Features:
- RFI (woven metallic) gasket ensures against ingress/egress interference, ≥110dB RFI shielding.
- Stainless steel hardware and aluminum port caps for corrosion resistance.
- Aluminum alloy housing with weather resistant powder coating and spray painting.
- Weather seal gasket ensures water tight protection, waterproof test condition: 15 psi / 60s, at least IP54.
- Umbrella-effect housing design prevents accumulation of water at ports.
- Waterproof condition: 15 psi (1.0 kg/cm2).
- Weatherproof, self-sealing F ports prevent breathing through ports when subscriber is disconnected; high quality silicon glue on all inside of F-ports.
- Bright Ni-plated, brass F ports offer increased strength and protection against corrosion in severe environmental conditions.
- Heat shrink ridges for easy installation.
- Bypass design: Include signal/power passing bar when faceplate is removed (uninterrupted power passing) .
- All IN and OUT ports are 5/8-24 female standard.
- All TAP ports are 3/8-32 female standard.
- Nominal impedance (all ports): 75 Ohms
- Using 2-layer high quality FR4 board P.C.B (Printed Circuit Board) for RF applications.
- Using high quality chip capacitors and chip resistors.
- Power Passing: 10A, 90VAC (IN-OUT Ports)
- Hum Modulation at 10A: - 70dB max.; at 12A: -65dB max.
- High Voltage Blocking Capacitors ; All ports Surge Withstand; All Tap ports at IEEE C62.41-1991 Category A3 (0.5 μs - 100 kHz Ring Wave, 6000 V, 200 A), 680V Capacitors; Input / Output ports at IEEE C62.41-1991 Category B3 (1.2/50 μs - 8/20 μs Combination Wave, 6000 V, 3000 A): 2KV capacitors.
- High quality printed circuit board for RF applications.
- Weight: 500g.
Specification:
| | TAP VALUE (dB) _ 8-WAY TAP |
| INSERTION LOSS (IN-OUT) max. | 11 | 14 | 17 | 20 | 23 | 26 | 29 | 32 |
| 5 - 65 MHz | - | 3.7 | 2.5 | 1.5 | 1.3 | 1.2 | 1.0 | 1.0 |
| 65 - 550 MHz | - | 5.0 | 3.5 | 2.1 | 1.6 | 1.4 | 1.3 | 1.3 |
| 550 - 750 MHz | - | 5.1 | 4.0 | 2.4 | 1.8 | 1.7 | 1.6 | 1.6 |
| 750 - 1000 MHz | - | 5.4 | 4.3 | 3.0 | 2.4 | 2.0 | 1.9 | 1.9 |
| TAP LOSS (IN-TAP) max. |
| 5 - 65 MHz | ±0.75 |
| 65 - 750 MHz | ±1.0 |
| 750 - 1000 MHz | ±1.5 |
| ISOLATION (OUT-TAP) min. |
| 5 - 1000 MHz | - | 27 | 27 | 27 | 29 | 29 | 29 | 29 |
| ISOLATION (TAP-TAP) min. |
| 5 - 1000 MHz (adjacent ) | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| 5 - 1000 MHz (non -adjacent) | 29 | 29 | 29 | 29 | 29 | 29 | 29 | 29 |
| RETURN LOSS (IN & OUT) min. |
| 5 - 1000 MHz | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
| RETURN LOSS (TAP) min. |
| 5 - 1000 MHz | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
| HUM MODULATION max. |
| 5 - 1000 MHz @ 10 A | -70 | -70 | -70 | -70 | -70 | -70 | -70 | -70 |
| 5 - 1000 MHz @ 12 A | -65 | -65 | -65 | -65 | -65 | -65 | -65 | -65 |
Outdoor 2-Way Splitter SYGFP-204D
Features:
- RFI (woven metallic) gasket ensures against ingress/egress interference, ≥ 110dB RFI shielding.
- Fuseable configuration.
- Heat shrink ridges for easy installation
- Stainless steel hardware for corrosion resistance.
- Aluminum alloy housing with weather resistant powder coating and spray painting.
- Weather seal gasket ensures water tight protection, tested at 15 psi (1.0kg/cm2) / 60s,at least IP56.
- All ports are 5/8-24 female standard.
- Nominal impedance (all ports): 75 Ohms
- Power Passing: 15A, 90VAC (IN-OUT All Ports)
- Response Flatness: ≤ ± 0.75 dB max.
- Hum Modulation at 10A: ≤ -70dB; at 12A: ≤ -65dB
- Using 2-layer high quality FR4 board P.C.B (Printed Circuit Board) for RF applications.
- Using high quality chip capacitors and chip resistors.
- High Voltage Blocking Capacitors - All ports Surge With stand at IEEE C62.41-1991 Category B3 (1.2/50 μs - 8/20 μs Combination Wave, 6000 V, 3000 A): 2KV Capacitors.
- Use plug inserts with Insurance which are used in car.
Specification:
| INSERTION LOSS (IN-OUT) max | OUTDOOR SPLITTER VALUE (dB)
2-WAY |
| 5 - 65 MHz | 4.0 |
| 65 - 550 MHz | 4.2 |
| 550 - 750 MHz | 4.5 |
| 750 - 1000 MHz | 5.1 |
| ISOLATION (OUT-OUT) min. |
| 5 - 1000 MHz | 25 |
| RETURN LOSS (IN & OUT) min. |
| 5 - 1000 MHz | 16 |
| POWER PASS (MAX) (A) | 15 @90VAC |
| RFI(dB) | ≥110 |
| Composite Cross Modulation(dB) | ≥66 |
| Voltage(V) | 90 typ.@50Hz |
Outdoor 3-Way Splitter (Balance) SYGFP-306D
Features:
- RFI (woven metallic) gasket ensures against ingress/egress interference, ≥110dB RFI shielding.
- Fuseable configuration.
- Heat shrink ridges for easy installation
- Stainless steel hardware for corrosion resistance.
- Aluminum alloy housing with weather resistant powder coating and spray painting.
- Weather seal gasket ensures water tight protection, tested at 15 psi (1.0kg/cm2) / 60s,at least IP56.
- All ports are 5/8-24 female standard.
- Nominal impedance (all ports): 75 Ohms
- Power Passing: 15A, 90VAC (IN-OUT All Ports)
- Response Flatness: ≤ ± 0.75 dB max.
- Hum Modulation at 10A: ≤ -70dB; at 12A: ≤ -65dB
- Using 2-layer high quality FR4 board P.C.B (Printed Circuit Board) for RF applications.
- Using high quality chip capacitors and chip resistors.
- High Voltage Blocking Capacitors - All ports Surge With stand at IEEE C62.41-1991 Category B3 (1.2/50 μs - 8/20 μs Combination Wave, 6000 V, 3000 A): 2KV Capacitors.
- Use plug inserts with Insurance which are used in car
Specification:
| INSERTION LOSS (IN-OUT) max. | OUTDOOR SPLITTER VALUE (dB)
3-WAY (BALANCE) |
| 5 - 65 MHz | 5.8 |
| 65 - 550 MHz | 6.3 |
| 550 - 750 MHz | 6.7 |
| 750 - 1000 MHz | 7.5 |
| ISOLATION (OUT-OUT) min. |
| 5 - 1000 MHz | 25 |
| RETURN LOSS (IN & OUT) min. |
| 5 - 1000 MHz | 16 |
| POWER PASS (MAX) (A) | 15 @90VAC |
| RFI(dB) | ≥ 110 |
| Composite Cross Modulation(dB) | ≥66 |
| Voltage(V) | 90 typ.@50Hz |
){kind=link}